A plasticiser is a substance which when added to a material, usually a plastic, makes it flexible, resilient and easier to handle.

Early examples of plasticisers include water to soften clay and oils to plasticise pitch for waterproofing ancient boats. There are more than 300 different types of plasticisers of which about 50-100 are in commercial use. The most commonly used are phthalates and adipates.

PVC is basically rigid at normal temperature. This is due to the short distances between the molecules since there are strong pulling forces between them (intermolecular forces). When heated, the energies of molecular motions become greater than the intermolecular forces, which widen molecular distances, resulting in softening of the resin. When plasticizers are added to PVC at this stage, the plasticiser molecules make their way between the PVC molecules and prevent the PVC polymer molecules from coming closer with each other. Consequently the polymer molecules are kept apart even at normal temperature and softness is maintained. This is the role of plasticisers and such process is technically called plasticising.

PVC polymer molecules have positive and negative polarities inside, while plasticiser molecules also have such polar and non-polar parts. The PVC polymer molecules and the plasticizer molecules are electrically attracted to each other, and the non-polar parts widen the distance among the polymer molecules to keep softness. PVC products which are softened by plasticisers are called soft (flexible) PVC products. In Europe, about 30 % of the total PVC resin production is used for flexible PVC products.

Importantly, plasticisers are not just additives (like pigments or fillers). They conform well to PVC (compatibility) keeping the required softness at minimal quantity (plasticising efficiency) and are major components that determine the physical properties of polymer products and should not easily migrate into air or water (low volatility, low migration).

In Western Europe about one million tonnes of phthalates are produced each year, of which approximately 900,000 tonnes are used to plasticize PVC. The most common are: diisononyl phthalate (DINP), diisodecyl phthalate (DIDP) and di-2-ethylhexyl phthalate (DEHP, sometimes also referred to as DOP),which have the well balanced properties described above. These plasticizers account for about 75% of all plasticisers used for PVC. Apart from phthalates, several other kinds of plasticisers are used to meet specific requirements, including adipates for low temperature resistance and trimellitates for heat resistance.

無錫嘉弘塑料科技有限公司擁有近30年的PVC粒料的研發、造粒生產經驗。專業技術服務團隊可為客戶提供一站式系統解決方案。如想了解更多關于產品的信息，歡迎登錄我們的官網∶zhushibao.net，咨詢在線客服或撥打熱線。固話：0510-68755207 手機：15190220696，我們將竭誠為您服務。

（免責聲明: 本站內收錄的所有教程與資源均來自于互聯網，其版權均歸原作者及其網站所有，本站雖力求保存原有的版權信息，但由于諸多原因，可能導致無法確定其真實來源，請原作者原諒！如果您對本站教程與資源的歸屬存有異議，請立即通知小編，情況屬實，我們會較早時間予以刪除。）